Bardahl antifreeze type D is based on ethylene glycol concentrate using Organic Acid Inhibitor Technology and does not contain nitrites, amines, phosphates, borates and silicates.

• Excellent performance in corrosion testing on copper, steel, cast iron, aluminium, brass and solder
• Chemical neutrality (pH : 8)
• Good reserve of alkalinity to neutralize the acidity of exhaust gases
• Excellent foam resistance
• Excellent stability against hard water
• Very low inhibitor depletion rates
• Will not damage paintwork or elastomer gaskets
• Contains inhibitory agents complying with EU legislation

The preparation of the water-antifreeze mixture should be carried out by adding an antifreeze concentrate to distilled water, followed by shaking. Coolant -35C is obtained by mixing antifreeze concentrate and distilled water in a 50/50 ratio.

A unique product that has no analogues. Mixes up with all types of antifreeze including antifreeze. High boiling point 175 degrees. Perfectly lubricates the pump and increases its service life.

A unique product that has no analogues. Mixes up with all types of antifreeze including antifreeze. High boiling point 175 degrees. Perfectly lubricates the pump and increases its service life.

• Excellent performance in corrosion testing on copper, steel, cast iron, aluminium, brass and solder
• Chemical neutrality (pH : 8)
• Good reserve of alkalinity to neutralize the acidity of exhaust gases
• Excellent foam resistance
• Excellent stability against hard water
• Very low inhibitor depletion rates - Will not damage paintwork or elastomer gasket material
• Contains inhibitory agents complying with EU legislation

Bardahl antifreeze type D is based on ethylene glycol concentrate using Organic Acid Inhibitor Technology and does not contain nitrites, amines, phosphates, borates and silicates.

• Excellent performance in corrosion testing on copper, steel, cast iron, aluminium, brass and solder
• Chemical neutrality (pH : 8)
• Good reserve of alkalinity to neutralize the acidity of exhaust gases
• Excellent foam resistance
• Excellent stability against hard water
• Very low inhibitor depletion rates
• Will not damage paintwork or elastomer gaskets
• Contains inhibitory agents complying with EU legislation

Ready-to-use XCL -25°C Universal Coolant is miscible and compatible with older technologies.

A film of OAT additives provides long-term protection of aluminum (and other metals) at high temperatures. Anti-corrosion and anti-cavitation properties. Prevents deposits. ALWAYS CHECK YOUR CAR MANUFACTURER'S MANUAL BEFORE USING. Before any coolant change, it is recommended to empty the circuit.

Very high corrosion protection: radiators, water pump, pipes. Aluminum protection. Excellent compatibility with gaskets and elastomers. High boiling point. Limits the risk of overheating in harsh temperatures and operating conditions. Does not contain nitrites, phosphates, borates and amines. ALWAYS CHECK YOUR CAR MANUFACTURER'S MANUAL BEFORE USING. Before any coolant change, it is recommended to empty the circuit.

Very high corrosion protection: radiators, water pump, pipes. Aluminum protection. Excellent compatibility with gaskets and elastomers. High boiling point. Limits the risk of overheating in harsh temperatures and operating conditions. Does not contain nitrites, phosphates, borates and amines. ALWAYS CHECK YOUR CAR MANUFACTURER'S MANUAL BEFORE USING. Before any coolant change, it is recommended to empty the circuit.