Alpine Turbo 15W-40 is a multi-purpose motor oil for year-round use. The presence of turbocharging due to exhaust gas and cooling of the charge air places higher demands on the mechanical and thermal properties of engine oils. This oil performs reliably in these more difficult operating conditions, even with extended drain intervals. Reliable cold starts at low ambient temperatures and full lubricity at high operating temperatures are guaranteed. The use of high shear active ingredients ensures compliance with the requirements of SAE 15W-40 throughout the entire oil change interval.

Instructions for use:

ALPINE Turbo 15W-40 is used in highly stressed diesel engines of trucks and cars, as well as gasoline engines. Engine oils in this performance category are recommended for extended oil change intervals.

Alpine Turbo La 15W-40 is a high performance low viscosity engine oil for year round use in low emission engines. The presence of turbocharging due to exhaust gas and cooling of the charge air places higher demands on the mechanical and thermal properties of engine oils. This oil performs reliably in these more difficult operating conditions, even with extended drain intervals. Reliable cold starts at low ambient temperatures and full lubricity at high operating temperatures are guaranteed.

Instructions for use:

ALPINE Turbo 15W-40 LA is used, in particular, in highly stressed Euro IV, Euro V and Euro VI truck engines equipped with an exhaust gas treatment system. It can also be used in diesel engines of trucks and cars with and without turbocharging, as well as gasoline engines (mixed fleet). It is also suitable for engines with and without particulate filters. Engine oils in this performance category are recommended for extended oil change intervals.

Alpine Turbo Super 10W-40 is a semi-synthetic base oil. Semi-synthetic base oils and a modern additive package adapted to high practical requirements ensure that the following properties are observed

• excellent protection against high pressure and wear;
• the possibility of year-round use and easy cold start;
• reduced wear during cold start-up due to fast lubrication;
• reliability at high temperatures;
• reduces fuel and oil consumption, thus reducing environmental pollution;
• excellent deposit and sludge prevention;
• extends the life of the engine;
• ensures long oil change intervals.

Instructions for use:

Alpine Turbo Super 10W-40 is the ideal oil for a mixed fleet. Multipurpose motor oil eliminates the possibility of misapplication, while saving inventory costs. Due to its very high performance in diesel engines, ALPINE Turbo Super 10W-40 can be used in all commercial and construction vehicles, incl. equipped with a turbocharging system, as well as in gasoline and diesel engines of passenger cars with or without turbocharging.

Alpine Turbo plus 10W-40 is a USHPD high alloy low viscosity engine oil. Thanks to the use of synthetic base oils and a special additive package, excellent resistance to oxidation and high temperatures is achieved. Good dispersing power keeps pistons clean and prevents deposits in the engine that can lead to power loss. At very low outside temperatures, reliable cold starts and fast oil supply to all lubrication points are ensured. Reliable control of extreme loads, reduced wear and friction losses. Economy is greatly improved by lower oil and fuel consumption and longer engine life.

Instructions for use:

ALPINE Turbo Plus 10W-40 has been specially developed for economical use in commercial diesel engines of all designs. ALPINE Turbo Plus 10W-40 is multigrade and also meets the conditions for older naturally aspirated and stationary diesel engines.

Alpine Turbo plus LA 10W-40 is a high performance low viscosity synthetic motor oil for commercial vehicles with a significantly reduced sulphated ash, phosphorus and sulfur content (low SAP). Thanks to the use of high-performance additives, excellent resistance to oxidation and high temperatures is achieved. Good dispersing power keeps pistons clean and prevents deposits in the engine that can lead to power loss. At very low outside temperatures, reliable cold starts and fast oil supply to all lubrication points are ensured. Reliable control of extreme loads, reduced wear and friction losses. Efficiency is significantly improved due to low oil and fuel consumption and increased service life of the units.

Instructions for use:

ALPINE Turbo plus LA 10W-40 has been specially developed for economical use in engines with an exhaust aftertreatment system (Euro V and VI). ALPINE Turbo plus LA 10W-40 is an all-weather oil that maintains the efficiency of exhaust gas aftertreatment systems for a very long time.

Alpine Turbo ultra LA 5W-30 is a hydrocracked, synthetic high performance, low viscosity, low SAPS engine oil for commercial vehicles.

Thanks to the use of high-performance additives, excellent resistance to oxidation and high temperatures is achieved. Good dispersing power keeps pistons clean and prevents deposits in the engine that can lead to power loss. At very low outside temperatures, reliable cold starts and fast oil supply to all lubrication points are ensured. Reliable control of extreme loads, reduced wear and friction losses. Efficiency is significantly improved due to low oil and fuel consumption and increased service life of the units.

Instructions for use:

ALPINE Turbo ultra LA 5W-30 has been specially developed for economical use in emission-optimized engines equipped with exhaust gas aftertreatment systems (Euro IV, V and VI). It can also be used without problems in CNG engines. ALPINE Turbo ultra LA 5W-30 is an all-weather oil and maintains the efficiency of exhaust gas aftertreatment systems for a very long time and ensures maximum oil change intervals.